Browse Categories

IP81S Seametrics Paddlewheel Insertion Meter: Stainless Steel, Size: 1/2" to 3", Max. Pressure 200 PSI (14 Bar)


Item Number: IP81S
Our Price: $670.00
Mechanical Flow Meters
 
Seametrics Paddlewheel Insertion Meters
Pipe size 1/2" to 3"
Item Number: IP81S

Features
  • High-quality ruby bearings for excellent low-flow performance and long life
  • One easily-replaced moving part
  • Pickup exerts no magnetic drag on the rotor
  • Square-wave frequency output can connect directly to PLC's or counter controls
  • Indicator or transmitter can be mounted on the flowmeter or remote
  • Fittings are available in a wide variety of materials and sizes
  • Fits 1/2” to 8” pipe

  • Applications
  • Industrial water/wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control
  • Chemical proportioning


  • The IP80-Series are impeller (or “paddlewheel”) insertion meters designed for use with a wide variety of liquids in pipe sizes 1/2" to 8". Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life. Low-flow performance is good, although other Seametrics flow meters are recommended where extremely low flows are being measured.
    The IP80-Series require special fittings that ensure correct depth placement in the pipe. Fittings come in a variety of materials for compatibility with specific applications. Tee fittings are individually wet-calibrated at the factory and marked with the K-factor (pulses per gallon). Saddle fittings must be field-installed on the pipe and do not come wet-calibrated. K-factors for saddles are based on factory-testing.



    Specification
    Model
    Sensor Body
    PVC
    Polypro
    Brass
    Stainless Steel
    Rotor
    PVDF
    Shaft
    Nickel-bonded tungsten carbide (Ceramic Optional)
    Bearings
    Ruby jewel
    O-ring
    EPDM (Viton optional)
    Rotor pickup
    GMR (Giant Magnetoresistive) Sensor
    Max Pressure
    175 PSI (12 Bar) @ 75° F
    200 PSI (14 Bar)
    Max Temperature
    130 ° F (55° C)
    200 ° F (93° C)
    Flow Range
    0.3 - 30 ft./sec
    Accuracy
    ±-1.5% of full scale
    Signal
    Hall effect current sinking pulse
    Power
    6-24 Vdc, 2 mA
    Max Current
    20 mA
    Cable
    #22 AWG, 3 Cond, 18 foot (maximum 2000' run)
    Regulatory
    Mark (Stainless steel, Brass and Standard power only)
    Shopping Cart
    Your cart is empty.