|
BIOS-01B Flow Based Injection System with Flow Monitoring
System
1 Flow Based Injection System with Flow Monitoring |
|
Pulse Instruments System Series |
|
Item
Number: BIOS-01B |
|
Single pass water system where
demand based feedback or tank is not available for treatment.
Automatic injection of chemical proportional to the flow rate. A digital flow
meter is connected to a digital metering pump that accepts an analog or pulse
proportional signal and use to inject liquids such as chemicals, sanitizers or
fertilizers at a rate proportional to flow rate.
The faster the flow, the faster the chemical injection, thereby maintaining a
constant ratio of chemical to water. The digital flow meter is wall mounted with
a digital readout of the flow rate, a re-settable totalizer, and a permanent totalizer.
It has two relays for alarm or contact control, and analog and pulse output. The
pulse output may be configured to send a selectable number of pulses per gallon.
More favored and versatile is to use to the 4-20mA proportional analog signal,
that may be easily set to a range of desired flow rate. The chemical metering
pump would accept a 4-20mA signal and may also be user scaled to a desired injection
output.
Includes
Digital Flow Meter with
Rate and Totalizer
Flow Sensor
Installation Fitting
Chemicall Injection Pump
Pre-wired and Programmed
BIOS-01 System
Selection Guide
BIOS-01A |
Flow Based
Injection System |
BIOS-01B |
Flow
Based Injection System with Flow Monitoring |
BIOS-01C |
Flow Based
Injection System
with Flow and ORP Monitoring |
BIOS-01D |
Flow Based
Injection System with Flow and pH Monitoring |
BIOS-01E |
Flow Based
Injection System with Flow and Chloring Monitoring |
BIOS-01F |
Flow Based
Injection System
with Flow and Chlorine Dioxide Monitoring |
BIOS-01G |
Flow Based
Injection System with Flow and Peracetic Acid Monitoring |
BIOS-01H |
Flow Based
Injection System with Flow, pH and ORP Monitoring |
|
|
|